Fronius TransSteel 2200 - 4-Step Stitch Welding

4-step stitch
welding
The "4-step stitch welding" mode is suitable for welding longer weld seams on thin
sheets, to prevent the weld seams from dropping through the parent material.
I
I
GPr SPt SPtSPb
GPo
+ +
4-step stitch welding
Explanation of symbols:
Press the torch trigger
Release the torch trigger
Abbreviations used:
GPr Gas pre-flow time
I Welding current
SPt Spot welding time / stitch welding time
SPb Stitch pause time
GPo Gas post-flow time
67
EN-US