Fronius TransSteel 2200 - Selecting the Desired Country-Specific Setting; Laying the Hosepacks Correctly

Selecting the
desired country-
specific setting
- The country-specific setting of the power source defines the unit (cm + mm or inch)
in which the set welding parameters are displayed
- The country-specific setting can be changed in the Setup menu 2nd level (Para-
meter SEt)
• A description of the SEt parameter and how to adjust the SEt parameter can be
found in section Setup Menu 2nd Level from page 100
Laying the
hosepacks cor-
rectly
77
EN-US