110 INF-TN1FSC-E
(2) Set the action to be taken at the time of burn-out.
Press the
ENT
key, and the ERROR screen appears.
(3) Select any of the ERROR items by the
or key
and press the
ENT
key.
(2) “ERROR”: setting of analog output at error (Burnout)
When an error occurs, set a current output to force a set value. When resolving the cause, the
current output is automatically restored.
“ERROR” means that the error code shows E2 or E3.
(1) Select “ERROR” on the OUTPUT RANGE screen
and press the
ENT
key, the cursor moves to “OUTPUT
ERROR”.
To Next Page
Loading...
