15 Problem Solving
476
Problem Solving
15
094-315
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
102-356
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
103-310
103-311
103-312
103-313
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
112-700
[Cause] The finisher's punch waste container is full.
[Remedy] Empty the punch waste container.
For more information on how to empty the punch waste container, refer to "Emptying Punch
Waste Container (for Finisher-B1)" (P.64).
116-210
[Cause] An error occurred in the USB memory device or media reader.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the error still is not resolved, contact our
Customer Support Center.
116-211
116-212
[Cause] An error occurred in the USB memory device or media reader.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the error still is not resolved, contact our
Customer Support Center.
116-220
[Cause] Failed to enter the Download mode.
[Remedy] Contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
