Fuji Xerox DocuCentre-IV 2060 Administrator's Guide

15 Problem Solving
478
Problem Solving
15
116-343
116-345
116-346
116-347
116-348
116-349
116-350
116-351
116-352
116-353
116-354
116-355
116-356
116-357
116-358
116-359
116-360
116-361
116-362
116-363
116-364
116-365
116-366
116-367
116-368
116-369
116-370
116-371
116-372
116-373
116-374
116-375
116-376
116-377
116-378
116-379
116-380
116-381
116-382
116-383
116-384
116-385
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
116-386
[Cause] The fax cable is not connected correctly.
[Remedy] Connect the cable securely, and then switch off the machine power, make
sure that the touch screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 2060
Category	All in One Printer
Language	English