15 Problem Solving
482
Problem Solving
15
121-333
[Cause] An error occurred between the machine and the device connected.
[Remedy] Confirm that the device is switched on, and then switch off the machine
power, make sure that the touch screen is blank, and switch on the machine
power. If the error still is not resolved, contact our Customer Support Center.
121-334
121-335
121-336
121-337
121-338
[Cause] An error occurred between the machine and the device connected.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
121-339
[Cause] An error occurred between the machine and the device connected.
[Remedy] Check the unit table for CoinKit. If an undefined item is included in the table,
correct the table. Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If the error still is not
resolved, contact our Customer Support Center.
121-340
121-350
121-370
[Cause] An error occurred between the machine and the device connected.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Downloaded From ManualsPrinter.com Manuals