Specifications
519
Appendix
16
Finisher-B1 (Optional)
Staple Capacity: A4: 50 sheets (90 gsm or less),
B4 or larger: 30 sheets (90 gsm or less)
Paper Size: Maximum: A3, 11 × 17", Minimum: B5
Position: 1 place (front/angled stapling)
Important • When using 80 gsm paper
Dimensions/Weight Width 559 × Depth 448 × Height 246 mm, 12 kg
Machine Footprint
(when the unit is
connected to
the main unit)
Width 1,036 × Depth 640 mm
(Main Unit + Finisher-A1)*
* When the extension tray and the bypass tray are fully extended.
Type Finisher tray : Collated (Offset available)/
Uncollated (Offset available)
Paper Size/Paper
Weight
Paper Size: Maximum: A3, 11 × 17"
Minimum: B5
Paper Weight: 60 - 220 gsm
Note • Paper smaller than B5 is delivered to the center tray.
Stacker Capacity Finisher tray (For paper not stapled)
A4: 2,000 sheets
B4 or larger: 1,000 sheets
Mixed stack*
1
: 300 sheets
Finisher tray (For paper stapled)
A4: 100 sets or 1,000 sheets
B4 or larger: 75 sets or 750 sheets
Center binding/folding
*2
: 50 sets or 600 sheets
Folding
*2
: 500 sheets
Important • When using 80 gsm paper
Staple Capacity: A4: 50 sheets (90 gsm
or less)
Paper size: Maximum: A3, 11 × 17", Minimum: B5
Position: 1 place (front: angled stapling, back: straight
stapling), 2 places (parallel stapling)
Important • When using 80 gsm paper
Punch
*3
Paper size: A3, 11 × 17", B4, A4, A4 , 8.5 × 11",
8.5 × 11" , B5
Number of Holes: 2/4 holes, or US 2/3 holes
Paper Weight: 60 - 200 gsm
Important • When using 80 gsm paper
Booklet Finishing
*2
Capacity: 15 sheets (Center binding),
5 sheets (Folding)
Paper Size: Maximum: A3, 11 × 17",
Minimum: A4, 8.5 × 11"
Paper Weight: 64 - 80 gsm (Center binding)
64 - 105 gsm (Folding)
Important • When using 80 gsm paper
Dimensions/Weight Width 643 × Depth 552 × Height 987 mm*, 28 kg
Width 643 × Depth 597 × Height 1057 mm*, 37 kg
(When the Booklet Maker Unit is attached)
* The values do not include the finisher transport area located within
the main unit.
Downloaded From ManualsPrinter.com Manuals