109 Printing Basics
Printer Settings
This section includes:
• "Using the Operator Panel to Change the Printer Settings" on page 109
• "Using the Printer Setting Utility to Change the Printer Settings" on page 110
• "Adjusting the Language" on page 110
Using the Operator Panel to Change the Printer Settings
You can select menu items and corresponding values from the operator panel.
When you first enter the menus from the operator panel, you see a highlight in the menus. This
highlight indicates the factory default menu setting. These settings are the original printer settings.
NOTE:
• Factory defaults may vary for different countries.
When you select a new setting from the operator panel, the setting is highlighted to identify it as the
current user default menu setting.
These settings are active until new ones are selected or the factory defaults are restored.
To select a new value as a setting:
1 Press the (System) button.
2 Select the desired menu, and then press the button.
3 Select the desired menu or menu item, and then press the button.
• If the selection is a menu, the menu is opened and the first menu item in the menu appears.
• If the selection is a menu item, the default menu setting for the menu item appears.
Each menu item has a list of values for the menu item. A value can be:
• A phrase or word to describe a setting
• A numerical value that can be changed
• An On or Off setting
NOTE:
• Press the and button at the same time. This will display the factory default menu settings.
4 Select the desired value.
5 Press the button.
This enables the setting value, which is indicated by a highlight.
6 Press the (Back) or button to return to the previous menu.
To continue setting other items, select the desired menu. To quit setting new values, press the
(System) button, and then press the (Back) or button to return to the main screen.
Driver settings may have precedence over changes previously made. In such case, change the
defaults of the operator panel.
To Next Page
Loading...
Need help?
General
