Specifications 28
Copy Function
Type Console
Memory 128 MB
HDD —
Scanning Resolution Document glass: 600 × 600 dpi
Printing Resolution Standard: 600 × 600 dpi
High Resolution: 1200 × 1200 dpi*
*: When printing in high resolution mode, printing speed may be reduced
due to image quality adjustment. Printing speed may also be reduced
depending on documents.
Halftone 256 grayscale gradation
Warm-up Time 36 seconds or less*
*: The values are based on a room temperature of 20 °C and on the factory
default setting.
IMPORTANT:
• It may take longer due to the image quality adjustment.
Original Paper Size Document glass: The maximum size is 215.9 × 297 mm for both
sheets and books.
Output Paper Size Multipurpose feeder (MPF):
Maximum: 215.9 × 355.6 mm (8.5 × 14")
Minimum: 76.2 × 148.5 mm (3 × 5.85")
Priority sheet inserter:
Maximum: 215.9 × 355.6 mm (8.5 × 14")
Minimum: 76.2 × 190.5 mm (3 × 7.5")
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or
less; left and right edges, 4 mm or less
Output Paper Weight 60 – 163 gsm (for postcard 60 – 190 gsm is available)
IMPORTANT:
• Use paper recommended by Fuji Xerox. Copying may not be
performed correctly depending on the conditions. For more
information, see "Print Media That Can Damage Your Printer" on
page 66.
First Copy Output Time 23 seconds (for A4 /standard mode)
Reduction/Enlargement Size-for-Size: 1:1
±1.3%
Preset %: 1:0.500, 1:0.707, 1:0.816, 1:1.225, 1:1.414, 1:2.000
Variable %: 1:0.25 - 1:4.00 (1% increments)
Continuous Copy Speed Monochrome:
A4 :15 sheets/minute
IMPORTANT:
• The speed may be reduced due to image quality adjustment.
• The performance may be reduced depending on the paper type or
paper tray.
To Next Page
Loading...
Need help?
General
