121 Copying
Reduce/Enlarge
You can reduce or enlarge the size of a copied image, from 25 % to 400 %.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
• This item is available only when
N-Up is set to Off or Manual.
1 Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 116
2 Press the (Copy) button.
3 Select Reduce/Enlarge, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• mm series
200%
A5→A4 (141%)
A5→B5 (122%)
100%*
B5→A5 (81%)
A4→A5 (70%)
50%
To Next Page
Loading...
