Copying 126
Sharpness
You can adjust the sharpness to make the copy sharper or softer than the original.
1 Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 116
2 Press the (Copy) button.
3 Select Sharpness, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, copy size, contrast,
and image quality.
See also:
• "Setting Copy Options" on page 118
6 Press the (Start) button to begin copying.
Sharpest Makes the copy sharper than the original.
Sharper
Normal* Does not make the copy sharper or softer than the original.
Softer Makes the copy softer than the original.
Softest
To Next Page
Loading...
