Fuji Xerox DocuPrint M205 b User Manual

Troubleshooting 212
Understanding Printer Messages
The printer LCD panel displays messages describing the current state of the printer and indicates
possible printer problems you must resolve. This section describes messages, their meanings, and
how to clear the messages.
IMPORTANT:
• When an error code is displayed, the print data remaining on the printer and the information accumulated in
the memory of the printer are not secured.
Error-Code What You Can Do
007-371 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 249
009-360 Reinstall the specified toner cartridge.
See also:
• "Installing a Toner Cartridge" on page 233
009-361
009-362
009-363
010-397 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 249
016-314
016-315
016-317
016-325
016-335
016-354
016-355
016-370
016-374
016-375
016-501
016-502
016-718 Press the button to cancel the current print job.
016-719
016-744 Press the button. Contact the Fuji Xerox local representative office or an authorised
dealer if this message appears repeatedly.
See also:
• "Online Services" on page 249
016-745
016-791 Press the button to clear the message.
016-795
016-797
016-920 Press the button. Execute the operation again according to the operation procedure.
016-930 Press the button. Remove the USB device and check if the USB device is
appropriate to the printer.
016-931 Press the button. Remove the USB hub. The USB hub is not supported.

Fuji Xerox DocuPrint M205 b Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M205 b
Category	All in One Printer
Language	English