Using the Operator Panel Menus and Keypad 162
• mm/inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
• Auto Job History
Purpose:
To automatically print a job history report after every 20 jobs.
Values:
NOTE:
• The Job History report can also be printed using the Report/List menu.
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Alert Tone Off Does not emit a tone when a problem occurs.
Low Emits a tone at the specified volume when a problem occurs.
Medium*
High
All Tones Off Disables all the alert tones.
Low Sets the volume of all the alert tones at once.
Medium
High
Millimeters (mm)* Specifies the default measurement unit.
Inches (")
Off* Does not automatically print a job history report.
On Automatically prints a job history report.
Off Does not show the alert message when the toner is low.
On* Shows the alert message when the toner is low.
To Next Page
Loading...
