Using the Operator Panel Menus and Keypad 154
• Lighten/Darken
Purpose:
To set the default scan density level.
Values:
• Sharpness
Purpose:
To set the default sharpness level.
Values:
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
Lighter2 Makes the scanned image lighter than the original. Works well with
dark print.
Lighter1
Normal* Works well with standard typed or printed documents.
Darker1 Makes the scanned image darker than the original. Works well with
light print or faint pencil markings.
Darker2
Sharpest Makes the scanned image sharper than the original.
Sharper
Normal* Does not make the scanned image sharper or softer than the original.
Softer Makes the scanned image softer than the original.
Softest
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the
scanned image.
2 mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
To Next Page
Loading...
Need help?
General
