Preparing the workstation for use
A26391-K124-Z100-1-7619 15
!
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the workstation off during the self-test.
Installing the software for the first time
!
Leave the external power adapter connected to your workstation during the initial
installation.
Once the installation has been started the workstation must not be switched off, unless
the installation has been completed.
During installation the workstation may only be rebooted when you are requested to do
so!
Ê During installation, follow the instructions on screen.
Consult the operating system manual if there is anything unclear about the requested input data.
i
You will find further information about the system, drivers, utilities, updates, manuals etc.
on the "CELSIUS Mobile Driver CD" supplied.
To Next Page
Loading...
Need help?
General