A26391-K124-Z100-1-7619 61
Connecting external devices
!
Under all circumstances, please observe the safety notes provided in the "Important
notes" chapter.
Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Do not pull on the cable when disconnecting a cable. Always take hold of the actual plug.
Adhere to the order described in the following when you connect external devices to the
workstation or separate them from the workstation:
Connecting devices to the workstation
1) Turn off all power and equipment switches.
2) Remove all power plugs from the mains outlets.
3) Connect all the cables to the workstation and the external devices.
4) Plug all data communication cables into the utility sockets.
5) Plug all power cables into the mains supply.
Disconnecting devices from workstation
1) Turn off all power and equipment switches.
2) Remove all power plugs from the mains outlets.
3) Unplug all data communication cables from the utility sockets.
4) Disconnect all the cables from the workstation and the external devices.
Ports
Connections on the rear
To Next Page
Loading...
Need help?
General