Security functions
A26391-K124-Z100-1-7619 57
Testing fingerprint
The option Please test to find suitable fingers allows you to test your fingerprint first.
i
Make sure that the contact area for your fingertip is big enough.
The more uniform the structure of your fingerprint, the less features are recognised by the
sensor. However for a secure log on to the system a minimum number of features has to
be registered. Therefore find out which of your fingertips have got the necessary features.
Ê Press the [T
TT
T] key.
Ê Test your finger by placing it on the fingerprint sensor.
When you have found out which of your fingers are suitable for registration, exit the test menu by
pressing [Esc
EscEsc
Esc].
Registering fingerprint
Registering supervisor fingerprint
Ê Press the [N
NN
N] key.
Ê Press the fingerprint sensor with one fingertip. The fingertip has to be placed on the sensor
several times in a row. Follow the instructions in the BIOS window.
After registering the first fingerprint you will re-enter the menu window.
Ê Press the [N
NN
N] key to register the next fingerprint.
i
It is necessary to register several fingers to make sure you can log on to your system in
case a finger is injured. It is best to use fingers of both hands for registration.
Ê Press [Esc]
[Esc][Esc]
[Esc] after registration is completed.
If you have not yet enough fingers read, a warning is issued. Otherwise you enter the menu to
register the user fingerprint (USER Fingerprint Security Menu).
Registering user fingerprint
Register several fingers here as well.
Ê Press the [N
NN
N] key.
Ê Press the fingerprint sensor several times in row with each fingertip. Follow the instructions in
the BIOS window.
Ê Press the [Esc]
[Esc][Esc]
[Esc] key.
The workstation restarts.
i
If you register supervisor fingerprints only, you can also activate the system protection in
BIOS Setup using the entry Password on Boot (see chapter "Password protection of
operating system").
To Next Page
Loading...
Need help?
General