Memory expansion
A26391-K124-Z100-1-7619 85
The memory module will flap upward (2).
Ê Pull the memory module out of its slot (3).
Mounting the cover
3
2
1
Ê Place the cover on its mounting location (1).
Ê Close the cover on the bottom of the
workstation (2).
Ê Fasten the cover with the three screws (3).
Ê Refit the battery.
Ê Place the workstation right side up on a flat, stabile, nonslippery surface.
Ê Reconnect the cables.
To Next Page
Loading...
