Fujitsu ETERNUS DX S5 Series - Figure 41 Power Supply Unit (Controller Enclosure for the ETERNUS DX60 S5;DX100 S5;DX200 S5) (AC Power Type); Figure 42 Power Supply Unit (Controller Enclosure for the ETERNUS DX100 S5) (DC Power Type)

LED name LED status Meaning
BUD FAULT
(amber)
The BUD is in error status.
FRT READY
(green)
The FRT is in normal status.
FRT FAULT
(amber)
The FRT is in error status.
SVC READY
(green)
The SVC is in normal status.
SVC FAULT
(amber)
The SVC is in error status.
■
Power Supply Units
There are two types of the power supply units: AC power type and DC power type. The AC power type power
supply unit converts input AC power from a power socket to DC power and supplies power to each component.
A controller enclosure has two power supply units.
Each power supply unit contains fans.
● ETERNUS DX60 S5/DX100 S5/DX200 S5
Figure 41 Power Supply Unit (Controller Enclosure for the ETERNUS DX60 S5/DX100 S5/DX200 S5) (AC
Power Type)
1 2
POWER LED
F
AULT LED AC MISSING LED
FAN FAIL LED
Figure 42 Power Supply Unit (Controller Enclosure for the ETERNUS DX100 S5) (DC Power Type)
POWER LED
F
AULT LED AC MISSING LED
FAN FAIL LED
1
2
1 PSU switch
This switch is used to turn on and off the power supply.
2 Inlet
This inlet is used to connect a power cord.
A. Component Names
Controller Enclosure
114 Operation Guide (Basic)