Drive Enclosure
Drives and an operation panel are installed in the front of the drive enclosure. I/O modules and power supply
units are installed in the rear.
Front
This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type
Figure 50 Front View of a 2.5" Type Drive Enclosure
Slot#0
Slot#1
Slot#2
Slot#3
Slot#4
Slot#5
Slot#6
Slot#7
Slot#8
Slot#9
Slot#10
Slot#11
Slot#12
Slot#13
Slot#14
Slot#15
Slot#16
Slot#17
Slot#18
Slot#19
Slot#20
Slot#21
Slot#22
Slot#23
1
3 3
2
1 Operation panel (refer to "
■ Operation Panel" (page 127))
2 2.5" drive (refer to "■ Drives" (page 129))
3 Flange cover
■
3.5" Type
Figure 51 Front View of a 3.5" Type Drive Enclosure
1
3 3
2
Slot#0 Slot#3Slot#1 Slot#2
Slot#4
Slot#8
Slot#11
Slot#7Slot#5
Slot#6
Slot#9 Slot#10
1 Operation panel (refer to "
■ Operation Panel" (page 127))
2 3.5" drive (refer to "■ Drives" (page 129))
3 Flange cover
A. Component Names
Drive Enclosure
122 Operation Guide (Basic)
To Next Page
Loading...
