Fujitsu ETERNUS DX S5 Series - Figure 47 Host Interface (ETERNUS DX900 S5); Table 27 Status and Meaning of each LED (Host Interface for the ETERNUS DX900 S5)

● ETERNUS DX900 S5
There are five types of host interfaces: FC 32Gbit/s, FC 16Gbit/s, iSCSI 10Gbit/s (10GBASE-SR/10GBASE-CR),
and iSCSI 1Gbit/s.
Figure 47 Host Interface (ETERNUS DX900 S5)
FC 4 ports
FC 2 ports
iSCSI 10Gbit/s (10GBASE-SR)
iSCSI 10Gbit/s (10GBASE-CR) iSCSI 1Gbit/s
LINK/FAULT LED
CA FAULT LED
CA READY LED
LINK/FAULT LED LINK/FAULT LED
LINK/FAULT LED
Port#0 Port#1
P
ort#0 Port#1
Port#2 Port#3
Port#0 Port#1 Port#0 Port#1
The states of LEDs are listed below.
Table 27 Status and Meaning of Each LED (Host Interface for the ETERNUS DX900 S5)
LED name LED status Meaning
CA FAULT
(amber)
The host interface is in error status.
CA READY
(green)
The host interface is in normal status.
LINK/FAULT
(green)
The link between the host interface port and the destination
port has been established.
(amber)
The host interface port is in error status.
A. Component Names
Controller Enclosure
119 Operation Guide (Basic)