Fujitsu ETERNUS DX S5 Series - Figure 5 on Position (Marked |) of the PSU Switch on a Power Supply Unit

■
To Switch to ON
Turn the PSU switch of the power supply unit to the ON position (marked "|").
IMPORTANT
Make sure all of the PSU switches are in the ON position.
Figure 5 ON Position (Marked "|") of the PSU Switch on a Power Supply Unit
ETERNUS DX60 S5/DX100 S5/DX200 S5
ETERNUS DX500 S5/DX600 S5/DX900 S5
PSU#0 PSU#1
PSU#0
PSU#1
PSU#0 PSU#1
Drive enclosure
Controller enclosure
Drive enclosure
PSU#0 PSU#1
PSU#0 PSU#1
Drive enclosure
Controller enclosure
ETERNUS DX100 S5 (DC power type)
Power is supplied to an enclosure.
• For the controller enclosure, the POWER LED on the power supply unit blinks green.
1. Basic Operation
Powering On and Off
15 Operation Guide (Basic)