Fujitsu ETERNUS DX S5 Series - Power Distribution Unit

Power Distribution Unit
There are two sizes for power distribution units: 1U and 2U.
Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
Figure 64 Power Distribution Units (1U)
3
2
1
1 Main line switch
This turns on and off the power distribution unit.
2 Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
3 Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).
Power Distribution Units (2U)
The 2U power distribution unit has 16 outlets.
Figure 65 Power Distribution Units (2U)
2
1
1
1 Main line switch
This turns on and off the power distribution unit.
2 Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
A. Component Names
Power Distribution Unit
133 Operation Guide (Basic)