EasyManua.ls Logo

Fujitsu ETERNUS DX S5 Series - 3. Process Time (Estimated); Volume Formatting Time; Rebuild;Copyback Process Time

Fujitsu ETERNUS DX S5 Series
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Process Time (Estimated)
This chapter explains the estimated time that is required for volume formatting and for rebuild/copyback for
each RAID level configuration.
Volume Formatting Time
The following table shows the time required for the volume formatting process.
Table 5 Volume Formatting Time
RAID level Number of drives
Volume formatting time (*1)
SAS disks Nearline SAS disks SSDs
RAID1 2 (1D+1M) Approx. 40 minutes/
100GB
Approx. 73 minutes/100GB Approx. 7
minutes/100GB
RAID1+0 8 (4D+4M) Approx. 30 minutes/
100GB
Approx. 43 minutes/100GB Approx. 3
minutes/100GB
RAID5 5 (4D+1P) Approx. 25 minutes/
100GB
Approx. 49 minutes/100GB Approx. 3
minutes/100GB
RAID5+0
6 ((2D+1P) ´
2)
Approx. 30 minutes/
100GB
Approx. 43 minutes/100GB Approx. 4
minutes/100GB
RAID6 6 (4D+2P) Approx. 40 minutes/
100GB
Approx. 58 minutes/100GB Approx. 4
minutes/100GB
*1: The value shows the time required for volume formatting when the volume capacity is 100GB and there is no server I/O. The time that is
required depends on the type and configuration of the drive.
Rebuild/Copyback Process Time
This section explains the time required for Rebuild/Copyback.
Rebuild Process Time
The following table shows the time required for the rebuild process.
Table 6 Rebuild Process Time
RAID level Number of drives
Rebuild process time (*1)
SAS disks Nearline SAS disks SSDs
RAID1 2 (1D+1M) Approx. 27 minutes/
100GB
Approx. 47 minutes/100GB Approx. 5
minutes/100GB
RAID1+0 8 (4D+4M) Approx. 7 minutes/
100GB
Approx. 11 minutes/100GB Approx. 2
minutes/100GB
RAID5 5 (4D+1P) Approx. 10 minutes/
100GB
Approx. 15 minutes/100GB Approx. 2
minutes/100GB
RAID5+0
6 ((2D+1P) ´
2)
Approx. 7 minutes/
100GB
Approx. 11 minutes/100GB Approx. 2
minutes/100GB
RAID6 6 (4D+2P) Approx. 13 minutes/
100GB
Approx. 21 minutes/100GB Approx. 2
minutes/100GB
*1: The value shows the rebuild process time when the volume capacity is 100GB and there is no server I/O. The time that is required
depends on the type and configuration of the drive.
28 Operation Guide (Basic)

Table of Contents

Other manuals for Fujitsu ETERNUS DX S5 Series

Related product manuals