Fujitsu ETERNUS DX S5 Series - 4. Component Expansion;Function Enhancement; License Registration

4. Component Expansion/Function Enhancement
This chapter explains the expansion functions and the installation of the optional products.
• "License Registration
" (page 30)
• "Installing Additional Drives" (page 32)
• "Installing Additional Drive Enclosures" (page 43)
• "Installing Long Wave SFP+ Modules (16Gbit/s)" (page 63)
• "Adding Servers" (page 67)
License Registration
■
Veeam Storage Integration License Registration
The following procedure explains how to register the Veeam Storage Integration license.
Registering the Veeam Storage Integration license to the ETERNUS DX enables the Veeam Storage Integration
function.
IMPORTANT
A Veeam Storage Integration license is issued for each
ETERNUS DX. The issued license cannot be
registered in another ETERNUS DX.
Note
For the procedure to obtain the Veeam Storage Integration license, refer to "Configuration Guide (Basic)".
1 Start up ETERNUS Web GUI.
2 Click the [Advanced Copy] tab on the navigation. Then, click [Settings] in [Category].
The [Settings] screen appears.
30 Operation Guide (Basic)