Installing Additional Drives
Drives can be installed by the customer while the system is running without affecting operations.
This section explains how to install drives in the ETERNUS DX
.
Make sure to read "Safety Notes and Regulations" before performing any of these procedures.
When adding servers to be connected, refer to "Adding Servers" (page 67).
• Customers are not allowed to install drives to the
ETERNUS DX500 S5/DX600 S5/
DX900 S5. To install drives, contact your sales representative or maintenance
engineer.
• Do not uninstall or move a drive that is already installed.
Contact your sales representative or maintenance engineer if drives that are
installed by default need to be uninstalled or moved to another slot.
Installable Drives
For installable drives, refer to "Product List".
Drive Handling Instructions
■
About Condensation
• When moving a drive from a cold place, such as an unconditioned store house in
winter, to a warmer place such as an air-conditioned room, the severe
temperature change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour
for each 15
°C of temperature difference) to adapt to the new temperature.
4. Component Expansion/Function Enhancement
Installing Additional Drives
32 Operation Guide (Basic)
To Next Page
Loading...
