2 Press the FUNCTION key for two seconds or more.
"Menu0:REMOTE MOD" is displayed on the LCD panel.
3 Press the INPUT key.
4 Press the INPUT key again after the confirmation message "[YES]/NO" is displayed on the bottom row of
the LCD panel.
When the INPUT key is pressed, the REMOTE LED is turned on and the
ETERNUS DX is set to remote mode.
When the remote mode is set, the selection message for the remote mode "[YES]/NO" is cleared and the
display returns to "Menu0:REMOTE MOD".
5 Press the CLEAR key to terminate the menu operation.
A. Component Names
Frontend Enclosures (ETERNUS DX900 S5)
92 Operation Guide (Basic)
To Next Page
Loading...
