8 Place the Cleaning Sheet on the left-hand side between the side guides with its adhesive side facing up.
9 Press the [Scan/Pause] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
10 Place the same Cleaning Sheet on the right-hand side between the side guides with its adhesive side
facing up.
11 Press the [Scan/Pause] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
12 Remove the protective paper from a new Cleaning Sheet.
13 Place the Cleaning Sheet on the left-hand side between the side guides with its adhesive side facing
down.
14 Press the [Scan/Pause] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
15 Place the same Cleaning Sheet on the right-hand side between the side guides with its adhesive side
facing down.
16 Press the [Scan/Pause] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
17 Press the [Stop] button.
Cleaning is completed.
18 Reset the cleaning counter.
Daily Care
119
To Next Page
Loading...
