Item Description Setting/Value Factory Default
Also use it to reset the counter
when you have replaced the
consumables or performed
cleaning.
Ink Level:Front / Ink Level:Back
(when the imprinter option is
installed)
Only displayed
when imprinter is
installed
Power saving Specify the waiting time before
entering power saving mode.
Range: 5 min. to 115 min. (in
increments of 5 min.)
15 min.
Power off after a certain period
of time: Select to have the
scanner turn off automatically
when it is turned on and left
unused for a certain period of
time.
Also, specify the time until
power-off.
[Power off after a certain
period of time] check box
Selected
1 Hour/2 Hours/4 Hours/8
Hours
(when the above check box is
selected)
4 Hours
Offset Setting Adjust the position to start
scanning for the specified
scanning side(s).
Unit:
ADF (Front) / ADF (Back)
Main/Sub: -2 to 3 mm (in
increments of 0.5 mm)
Main/Sub: 0 mm
Vertical
magnification
Adjustment
Adjust the magnification level
in the feeding direction for the
specified scanning method.
Unit: ADF
Range: -3.1 to 3.1% (in
increments of 0.1%)
0%
Operational Settings
207
To Next Page
Loading...
