Item Description Setting/Value Factory Default
Multifeed detection
when scanning in
manual feeding
mode
Specify this item to enable
multifeed detection during
manual feeding.
Disable / Follow driver settings Disable
Page Edge Filler
(ADF)
Specify a width for the margin
off the edge of the scanned
image to fill in black or white.
The margins are filled in white
when the background is white,
and filled in black when the
background is black.
It can also be configured from
the scanner driver's setup
dialog box. Note that priority is
given to the setting with a
larger value.
Top/Left/Right: 0 to 15 mm
Bottom: -7 to 7 mm (in
increments of 1 mm)
(A: Image, B: Filled area, A+B:
Output)
Top/Bottom/Left/
Right: 0 mm
Dropout color Select a color to be dropped
out from the scanned image
(black & white/grayscale only).
It can also be configured from
the scanner driver's setup
dialog box. Note that priority is
given to the scanner driver
setting.
Red / Green / Blue / None Green
Pre-Pick Select [Yes] to prioritize the
processing speed and [No] for
otherwise.
It can also be configured from
the scanner driver's setup
dialog box. Note that priority is
given to the scanner driver
setting.
Yes / No Yes
Page Edge Filler
(Automatic Page
Size Detection)
Specify the range of area to fill
in when [Automatic Page Size
Detection] is selected.
Specify a width for the margin
off the edge of the scanned
image to fill in black or white.
The margins are filled in white
when the background is white,
and filled in black when the
background is black.
Top/Bottom/Left /Right: 0 to
7.5 mm
(in increments of 0.5 mm)
Top/Bottom/Left/
Right: 0 mm
Operational Settings
209
To Next Page
Loading...
