(4) [Send to] Button Configuration Number
Displays the number assigned to the application that is launched when the [Send to] button is pressed.
For information on how to configure the [Send to] button, refer to How to Use Function Selection (page
96).
(5) Multifeed Pattern Memory
appears when memorizing a multifeed pattern.
For information on how to memorize multifeed patterns, refer to Bypassing Multifeed Detection for a Fixed
Format (page 111).
(6) iMFF Setting
Displays the iMFF setting as follows:
Icon Mode
Manual mode
Auto mode 1
Auto mode 2
The icon switches when the [iMFF] button is pressed down for more than two seconds.
In Manual mode, is displayed at all times.
In Auto mode 1 and Auto mode 2, it displays the number of multifeed patterns memorized (max. of 8
patterns).
For information on how to configure the iMFF setting, refer to How to Use the Main Menu (page 80).
(7) Paper Separation Force
Displays the paper separation force as follows:
Icon Low ←→ High
For information on how to adjust the paper separation force, refer to Adjusting the Paper Separation Force
(page 37).
How to Use the Operator Panel
79
To Next Page
Loading...
