Fujitsu PRIMERGY RX200 S3 User Manual

34 Operating Manual RX200 S3
Installing/Removing the Server in/from the Rack Hardware Installation
In principle the ventilation concept plans that the necessary cooling is
reached by the horizontal self-ventilation of the installed devices (air flow
from the front to the rear).
– Power supply:
For installation in 3rd party racks it must be ensured that the appropriate
socket strips are present.
Figure 2: Mechanical requirements

Fujitsu PRIMERGY RX200 S3 Specifications

General

Number of Processors	2
Storage	Up to 6 x 3.5" SAS/SATA HDD
RAID Support	RAID 0, 1
Network	Dual Gigabit Ethernet
Form Factor	1U Rack
Power Supply	Hot-plug redundant power supply