137
PRIMERGY RX300 S2 User’s Guide
5
Operations after OS Installation
■ Paging File Setting
Set up the paging file according to the following procedures.
1 Log on to the server with administrator privileges.
2 Check free space of the drive where the system is installed.
Check the required amount of free space according to "■ Checking Hard Disk Free Space"
(
pg.134). If the drive has no free space, refer to "■ Cannot collect the memory dump"
(
pg.268).
3 Click [Start] → [Settings] → [Control Panel].
4 Double-click the [System] icon.
The [System Properties] window appears.
5 Click the [Advanced] tab and click [Performance Options].
The [Performance Options] window appears.
To Next Page
Loading...
