Fujitsu Primergy RX300 S2 User Manual

168
Chapter 6 High Reliability Tools
6.1 Server Monitoring Tool
[ServerView]
ServerView constantly monitors the status of the servers' hardware in the network
and provides a console with which the administrator can check the status of all the
servers at a glance. In addition, if an error occurs, the administrator will be notified in
real-time to take immediate action.
■ Installing ServerView
● When Installed Using ServerStart
If the OS is implemented and setup using ServerStart, ServerView will be installed at once with the OS
and other high reliability tools.
● When Installed Manually
When installing ServerView individually, refer to "Chapter 2 Installing" in "ServerView User's Guide".
● For Linux
ServerView cannot be installed using ServerStart. To install ServerView into a Linux system, refer to
"ServerView User's Guide".
 Be sure to install SNMP service before installing ServerView.
■ Setting Required after Installation
Perform necessary operations after ServerView installation referring to "2.4 Checking after Installation"
in "ServerView User's Guide".
■ Boot Monitoring Setting
We recommend enabling the "Boot Monitoring" function after ServerView is installed. For setting
procedures and explanation on the function, refer to "[Restart Settings] Tab" of "3.2.4 Serious Error
Handling (ASR)" in "ServerView User's Guide".

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional