Fujitsu Primergy RX300 S2

149
PRIMERGY RX300 S2 User’s Guide
5
Operations after OS Installation
5.4.2 Creating a Hardware Configuration Tool
This section explains how to create a Hardware Configuration Tool from the ServerStart CD-ROM.
Prepare floppy disks as many as the tools you want to create beforehand.
Types of a Hardware Configuration Tool vary by model.
1 Start up ServerStart and click [FloppyBuilder].
For details on procedures for starting up ServerStart, refer to "■ Starting ServerStart" (pg.146).
2 Click [Hardware Configuration Tool].
3 Click the tool you want to create.
Insert the prepared floppy disk by following the message.
4 Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that the
disk is created, click [OK] and eject the disk.