230
Chapter 8 Hardware Configuration/Utilities
8.2.5 Advanced Menu
Configures peripheral and PCI devices.
table: Items on the Advanced Menu
Item Setting Description
Peripheral Configuration [Enter] Configures the serial port, parallel port, etc.
"8.2.6 Peripheral Configuration Submenu"
(pg.231)
PCI Configuration [Enter] Configures the PCI device.
"8.2.7 PCI Configuration Submenu" (pg.233)
Advanced System
Configuration
[Enter] Configures additional settings.
"8.2.8 Advanced System Configuration
Submenu" (pg.235)
Power On/Off [Enter] Configures power On/Off settings.
"8.2.9 Power On/Off Submenu" (pg.237)
IPMI [Enter]
Configures the Baseboard Management Controller
(BMC).
"8.2.10 IPMI Submenu" (pg.238)
Reset Configuration Data • Yes
• No (at the time of
purchase)
Sets the initialization of the Extended System
Configuration Data (ESCD) where the system
resources are recorded.
Multiprocessor
Specification
1.4 (Fixed parameter)
Sets the version of the multiprocessor table to be
used.
The multiprocessor table is necessary for the
operating system for multiprocessors to recognize
the system's multiprocessor specifications.
Item Specific Help
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9
F7
Setup Defaults
Previous Values
Setup Warning
PhoenixBIOS Setup Utility
Main Advanced Security Server Exit
Setting items on this menu to incorrect values
may cause your system to malfunction.
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
IPMI
Reset Configuration Data: [No]
Multiprocessor Specification:
[1.4]
To Next Page
Loading...
Need help?
General
