Fujitsu Primergy RX300 S2 - 8.2 BIOS Setup Utility

223
PRIMERGY RX300 S2 User’s Guide
8
Hardware Configuration/Utilities
8.2 BIOS Setup Utility
This section explains settings for the BIOS Setup Utility and items regarding each
setting.
8.2.1 Starting and Exiting the BIOS Setup Utility
The following explains how to start and exit the BIOS Setup Utility.
■ How to Start the BIOS Setup Utility
1 Turn the server on.
2 During POST, press the [F2] key while the message "<F2>BIOS Setup / <F12>
BOOT Menu" is displayed on the screen.
The [Main menu] window appears when the POST completes.
Advanced Security Server Exit
System Time: [HH:MM:SS]
System Date: [MM:DD:YYYY]
Diskette A: [1.4M]
IDE Drive 1: [None]
IDE Drive 2: [None]
IDE Drive 3: [SR244W-(SM)]
IDE Drive 4: [None]
Boot Options
Base Memory: 640 KB
Extended Memory: xxx M
PhoenixBIOS Setup Utility
Item Specific Help
Main
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9
F7
Setup Defaults
Previous Values