Fujitsu Primergy RX300 S2 User Manual

83
PRIMERGY RX300 S2 User’s Guide
3
OS Installation Using ServerStart
3.3.3 OS Installation Wizard
Set computer information, user information, and the network protocol.
ServerStart can configure multiple network patterns. When configuring a domain controller, refer to
"Using ServerStart to configure the Network".
 The setting window differs depending on the OS to be installed. The following describes operations on
Windows Server 2003.
1 Click [Installation Wizard for MS Windows Server 2003].
A message prompting you to specify the configuration file appears.
2 Click [No].
The [Windows Installation] window appears.
3 Enter the password in [Password for Administrator account] and [Please repeat
Password] and click [Next].
 If the password differs between [Password for Administrator account] and [Please repeat Pass-
word], an error dialog window appears. Enter the correctly password.
The [Computer Identification] window appears.
4 Set items and click [Next].
The [Installation Directory and Time Zone] window appears.
5 Set items and click [Next].
The [User Name] window appears.
6 Set items and click [Next].
The [Display Settings] window appears.
7 Set items and click [Next].
The [Network Protocol] window appears.
8 Set items and click [Next].
The [Software Components] window appears.
9 Set items and click [Next].
The [Services] window appears.

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional