207
PRIMERGY RX300 S2 User’s Guide
Installing Internal Options
7
7.7.2 Available Internal Backup Devices
On this server, you can install the internal backup devices using the 3.5-inch storage bay.
For more information on the internal backup device, refer to the user guide provided with the internal
backup device.
7.7.3 Installing Internal Backup Devices
1 Turn off the server and peripheral devices, then unplug the power cables from
the server.
"1.4.3 Turning Off the Server" (pg.33)
2 Touch a metal part of the server to discharge static electricity.
3 Remove the dummy units or internal hard disk units in bays 4 and 5.
table: List of available internal backup devices
Product name Model Remarks
Tape Drv DAT72 36GB internal w/Drive Cage PG-DT502D2 Internal SCSI cables supplied
Dummy unit
Press the tabs inward
To Next Page
Loading...
