Fujitsu Primergy RX300 S2 - Configure Settings in Wizards

76
Chapter 3 OS Installation Using ServerStart
3.2.2 Configure Settings in Wizards
Click the wizards to set items in the following procedures. For setting procedures, refer to description on
guided mode wizards ("3.1.2 Open/create a Configuration File" (
pg.60) to "3.1.6 Application Wizard"
(
pg.69)).
Exiting a wizard returns the display to the preconfiguration mode window.
Open/create configuration file
OS installation wizard
Application wizard
Close/save configuration file
Starting OS installation
RAID wizard
Activate ServerStart in the server
Disk wizard