244
Chapter 8 Hardware Configuration/Utilities
8.2.13 CPU Status Submenu
Appears when [CPU Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed CPU.
table: Items on the CPU Status Submenu
Item Setting Description
CPU 0 Status Enabled (Fixed parameter) Sets whether or not to allow the use of CPUs
installed in CPU Sockets 0 and 1.
If the item is set to [Disabled] or [Failed], change
the setting to [Enabled] after replacing the CPU.
CPU 1 Status
Item Specific Help
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9
Setup Defaults
PhoenixBIOS Setup Utility
Server
CPU 0 Status [Enabled]
CPU 1 Status [Enabled]
CPU Status
F7
Previous Values
To Next Page
Loading...
