243
PRIMERGY RX300 S2 User’s Guide
8
Hardware Configuration/Utilities
Action • Continue
• Reset (at the time of
purchase)
• Power Cycle
Sets the operation to be performed when a timeout
occurs during OS boot monitoring.
Timeout Value • 0 (at the time of
purchase)
• 1–100
When [O/S Boot Timeout] is set to [Enabled], the
system restarts automatically if the OS fails to start
up within the time set for this item.
ASR&R Boot Delay • 2 (at the time of
purchase)
• 1–30
Sets the time required until the Automatic Server
Reconfiguration & Restart (ASR&R) function
reboots.
Power Cycle Delay 5 (Fixed parameter) Sets the time until the server is turned on after it is
turned off.
Boot Retry Counter • 3 (at the time of
purchase)
•0–7
Sets the maximum number of retries to boot the
operating system within the range of 1 to 7.
The count value is decremented by one after each
instance of retry processing.
Diagnostic System Disabled (Fixed parameter) Sets the operation to be performed when the
number of system boot retries exceeds the number
specified in [Boot Retry Counter].
Temperature Monitoring Disabled (Fixed parameter) Sets whether or not to turn the power off in the
event of abnormal temperature.
Memory Scrubbing Enabled (Fixed parameter) Sets whether or not to correct errors of memory
space that is currently not used by the OS or
application programs.
CPU Status [Enter] This submenu sets whether or not to allow the use
of the installed CPU.
"8.2.13 CPU Status Submenu" (pg.244)
Memory Status [Enter] This submenu sets whether or not to allow the use
of the installed memory.
"8.2.14 Memory Status Submenu" (pg.245)
Console Redirection [Enter] This submenu configures detailed settings for
console redirection.
"8.2.15 Console Redirection Submenu" (pg.246)
RomPilot [Enter] This server cannot use this.
table: Items on the Server Menu
Item Setting Description
To Next Page
Loading...
Need help?
General
