Fujitsu Primergy RX300 S2 User Manual

240
Chapter 8 Hardware Configuration/Utilities
8.2.11 Security Menu
Configures the security features.
table: Items on the Security Menu
Item Setting Description
Setup Password - Displays whether a setup password is specified.
[Not installed] appears when the password is not
set, and [Installed] appears when it is set.
System Password - Displays whether an administrator password
(system password) is set or not.
[Not installed] appears when the password is not
set, and [Installed] appears when it is set.
Set Setup Password [Enter] Sets a setup password. The setup password prevents
unauthorized startup of the BIOS Setup.
Select this field and press the [Enter] key. Then
enter the setup password.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" (pg.278).
Setup Password Lock • Standard (at the time of
purchase)
• Extended
Sets the scope protected by the setup password.
A setup password must be specified in advance.
Set System Password [Enter] Sets a system password. The system password
prevents unauthorized access to the system.
A setup password must be specified.
Select this field and press the [Enter] key. Then
enter the system password.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" (pg.278).
System Password Mode • System (at the time of
purchase)
• Keyboard
Sets the scope protected by the system password. A
setup password and a system password must be
specified.
Item Specific Help
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9
Setup Defaults
PhoenixBIOS Setup Utility
Main Advanced Security Server Exit
Setup Password Not Installed
System Password Not Installed
Set Setup Password: [Press Enter]
Setup Password Lock: [Standard]
Set System Password: [Press Enter]
System Password Mode: [System]
System Load: [Standard]
Setup Prompt: [Enabled]
Virus Warning: [Disabled]
Diskette Write: [Enabled]
Flash Write: [Enabled]
F7
Previous Values

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional