Fujitsu Primergy RX300 S2 - Page 239

239
PRIMERGY RX300 S2 User’s Guide
8
Hardware Configuration/Utilities
■ LAN Settings Submenu
Performs LAN settings to enable remote operations using RemoteControlService.
System Event Log [Enter] Displays the SEL contents.
The system event log this submenu displays is a
reference SEL. To display SEL in detail, refer to
"9.3 System Event Log" (pg.273).
SDRR Browser [Enter] Displays each sensor data item.
LAN Settings [Enter] Performs LAN settings to enable remote operations
using RemoteControlService.
"
■ LAN Settings Submenu" (pg.239)
table: Items on the LAN Settings Submenu
Item Setting Description
Local IP address - Enter the IP address of the onboard LAN.
Note:
 Set an IP address different from that in OS
settings.
Subnet mask - Enter the subnet mask of the onboard LAN
specified in [Local IP address].
Gateway address - Enter the gateway address of the onboard LAN
specified in [Local IP address].
User ID 1 Password - Enter the user ID 1 password of the onboard LAN
specified in [Local IP address].
table: Items on the IPMI Submenu
Item Setting Description