Fujitsu Primergy RX300 S2 User Manual

241
PRIMERGY RX300 S2 User’s Guide
8
Hardware Configuration/Utilities
System Load • Standard (at the time of
purchase)
• Diskette/CDROM Lock
Sets whether to enable or disable system startup
from a floppy disk or CD-ROM.
Setup Prompt • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to display a setup message
"<F2>BIOS Setup/<F12>BOOT Menu" on the
[POST] window during system restart.
Virus Warning Disabled (Fixed parameter) Sets whether or not to check the changes of the boot
sector of the hard disk drive after the previous
system startup. If the boot sector is changed without
a clear reason, it is necessary to scan the system for
computer viruses with a virus detection program.
Diskette Write • Disabled
• Enabled (at the time of
purchase)
Sets whether to enable or disable write protect on a
floppy disk.
Flash Write • Disabled
• Enabled (at the time of
purchase)
Sets whether to enable or disable write protect in
the system BIOS.
table: Items on the Security Menu
Item Setting Description

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional