148
Chapter 5 Operations after OS Installation
■ Creating a DOS Floppy Disk
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1 Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2 Click [DOS Diskette].
Insert the prepared floppy disk by following the message.
3 Perform the procedures following to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS floppy disk will be created automatically.
When a message appears indicating that creating the disk is completed, click [OK] and eject the
disk.
To Next Page
Loading...
