225
PRIMERGY RX300 S2 User’s Guide
8
Hardware Configuration/Utilities
■ How to Exit the BIOS Setup Utility
1 Use the [←] [→] keys to display the [Exit] menu.
2 Use the [↑] [↓] keys to select the exit mode.
• To save configuration changes before exiting.
Move the cursor to [Save Changes & Exit] and press the [Enter] key.
The message "Save configuration changes and exit now?" is displayed.
• To exit without saving configuration changes.
Move the cursor to [Discard Changes & Exit] and press the [Enter] key.
The message "Configuration has not been saved! Save before exiting?" is displayed.
3 Use the [←] and [→] keys to move the cursor to [Yes] or [No], and press the
[Enter] key.
• If you selected [Save Changes & Exit] from the [Exit] menu.
Select [Yes] to exit.
After saving changes to settings, the BIOS Setup Utility closes and the server restarts.
Select [No] not to exit.
The display returns to the BIOS Setup Utility window.
• If you selected [Discard Changes & Exit] from the [Exit] menu.
Select [Yes] to save changes before exit.
The BIOS Setup Utility closes and the server restarts.
Select [No] to exit without saving changes to settings.
The BIOS Setup Utility closes and the OS starts.
Advanced Security Server
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
Phoenix BIOS Setup Utility
Item Specific Help
Main
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9
F7
Setup Defaults
Previous Values
Exit
To Next Page
Loading...
