Fujitsu Primergy RX300 S2 - Page 249

249
PRIMERGY RX300 S2 User’s Guide
8
Hardware Configuration/Utilities
Subnet mask/Gateway
address
- Sets the address of the subnet mask and default
gateway used in [Local IP address].
This item appears when [RomPilot Support] is set
to [Enabled].
Front End n Mode • Disabled (at the time of
purchase)
• Enabled
Specifies a type of the terminal used for console
redirection with an IP address. Up to three IP
addresses are specifiable.
This item appears when [RomPilot Support] is set
to [Enabled].
Front End n IP -
table: Items on the RomPilot Submenu
Item Setting Description