EasyManua.ls Logo

Fujitsu Primergy RX300 S2 - Page 28

Fujitsu Primergy RX300 S2
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Chapter1 Overview
g Power connector1
h Power connector2
i Power connector3
j USB connector
k Control panel connector
l IDE connector
An IDE cable of the internal CD-ROM drive is plugged in.
m Floppy disk drive connector
A floppy disk drive cable is plugged in.
n SMB connector
o SCSI connector A
An internal hard disk unit is plugged in.
p SCSI connector B
An internal hard disk unit is plugged in.
q Array cache memory slot
r Internal power connector
An internal power cable is plugged in when a remote service board is installed. For more details,
refer to "
Remote Service Board" (pg.193) in "7.5.2 Installable Expansion Cards and Notes
on Installation" (
pg.191).
s Server control connector
A server control cable is plugged in when a remote service board is installed. For more details,
refer to "
Remote Service Board" (pg.193) in "7.5.2 Installable Expansion Cards and Notes
on Installation" (pg.191).

Table of Contents

Other manuals for Fujitsu Primergy RX300 S2

Related product manuals