53
PRIMERGY RX300 S2 User’s Guide
2
Checking before OS Installation
3 Click [Next].
The [License Agreement] window appears.
4 Select [I accept the license agreement] and click [Next].
The [User Information] window appears.
5 Enter the user information of the software and click [Next].
The [Installation Folder] window appears.
6 Specify the installation folder and click [Next]. To change the installation folder,
click [Browse] and select the folder.
The [Select Features] window appears.
7 Set [ServerStart - remote installation] to "Disable this function" and click [Next].
The [Ready to Install the Application] window appears.
8 Specify whether or not to copy the contents of the CD.
When you select [Yes] for "enable the use of ServerStart without CD.", you can start the
preconfiguration mode on the client computer without using the CD-ROM.
If you select [Yes], specify the target folder. The target folder must have enough free space to
copy the contents of the CD-ROM.
To Next Page
Loading...
